morphology operation that generate an additional compact border region around shapes
morphology operation that generate an additional compact border region around shapes
I have a gray scale mask (https://www.flickr.com/photos/gbachelie ... edpublic/) that should be used in CopyOpacity to mask out regions with strong aliased edges (https://www.flickr.com/photos/gbachelie ... 7436918822).
My idea was to enlarge the black shapes of the mask (and add a blur to get a soft transition). I thought something like "negate morphology Thicken Disk:n negate" with n=5, 10, ... would work, but aliased edges were still visible after a compose Over. A compare with the enlarged mask without blur shows a disconnected pixel cloud instead of an additional compact border region around the areas (https://www.flickr.com/photos/gbachelie ... edpublic/). So I added a blur (blur 4x3) (https://www.flickr.com/photos/gbachelie ... edpublic/). The compare (https://www.flickr.com/photos/gbachelie ... edpublic/) shows an expected compact border but in the result compositing aliased edges were still visible. Perhaps the blur transforms black pixels inside the shape boarder to gray pixels that become transparent but the larger the border the less this this effect would be ...
Perhaps the morphology operation is not the right one to generate an additional compact border region around shapes that will mask out aliased edges supported by the first compare. Any idea on this matter? Thank you!
best regards
Günter
My idea was to enlarge the black shapes of the mask (and add a blur to get a soft transition). I thought something like "negate morphology Thicken Disk:n negate" with n=5, 10, ... would work, but aliased edges were still visible after a compose Over. A compare with the enlarged mask without blur shows a disconnected pixel cloud instead of an additional compact border region around the areas (https://www.flickr.com/photos/gbachelie ... edpublic/). So I added a blur (blur 4x3) (https://www.flickr.com/photos/gbachelie ... edpublic/). The compare (https://www.flickr.com/photos/gbachelie ... edpublic/) shows an expected compact border but in the result compositing aliased edges were still visible. Perhaps the blur transforms black pixels inside the shape boarder to gray pixels that become transparent but the larger the border the less this this effect would be ...
Perhaps the morphology operation is not the right one to generate an additional compact border region around shapes that will mask out aliased edges supported by the first compare. Any idea on this matter? Thank you!
best regards
Günter

 Posts: 12150
 Joined: 20100123T23:01:3307:00
 Authentication code: 1151
 Location: England, UK
Re: morphology operation that generate an additional compact border region around shapes
Pretty pictures. What are they?
Looking at the 3000x3000 versions, the first image initially looks black and white only: two black blobs on a white background. It seems to be aliased (ie with steps). But it has been saved with JPG, and some edges are perhaps deliberately gray. Many pixels close to the black/white boundary are neither black nor white, and this may have been caused by the JPEG compression.
Aside from that, the mask seems to follow the black shapes in the first colour image exactly, with no need to expand it.
This makes the black areas from the colour images transparent. Isn't that what you want? Some pixels will be not quite right, because of the problems I mentioned above. "threshold 50%" on the mask might fix that.
Perhaps you want a slightly larger area to become transparent, with feathered transparency so you don't have a sudden transition from fully transparent to fully opaque.
Looking at the 3000x3000 versions, the first image initially looks black and white only: two black blobs on a white background. It seems to be aliased (ie with steps). But it has been saved with JPG, and some edges are perhaps deliberately gray. Many pixels close to the black/white boundary are neither black nor white, and this may have been caused by the JPEG compression.
Aside from that, the mask seems to follow the black shapes in the first colour image exactly, with no need to expand it.
Code: Select all
convert 32314622152_d013e4a656_o.jpg 32061262473_c77cf14c4e_o.jpg compose CopyOpacity composite x.png
Sorry, I don't understand that.gubach wrote:Perhaps the morphology operation is not the right one to generate an additional compact border region around shapes that will mask out aliased edges supported by the first compare.
Perhaps you want a slightly larger area to become transparent, with feathered transparency so you don't have a sudden transition from fully transparent to fully opaque.
snibgo's IM pages: im.snibgo.com
 fmw42
 Posts: 25549
 Joined: 20070702T17:14:5107:00
 Authentication code: 1152
 Location: Sunnyvale, California, USA
Re: morphology operation that generate an additional compact border region around shapes
What about something like this, that blurs the edge, but uses level to only blur the outside of your black area. I am using your 600 px versions.
Unix syntax:
For Windows,
Adjust the blur size as desired and for your image resolution.
Please always provide your IM version and platform, since syntax differs.
Unix syntax:
Code: Select all
convert 32782813936_e665f21d08_z.jpg \
\( 32032969714_95bfabaf09_z.jpg blur 0x2 level 50x100% \) \
alpha off compose copy_opacity composite result.png
For Windows,
Code: Select all
convert 32782813936_e665f21d08_z.jpg ^
( 32032969714_95bfabaf09_z.jpg blur 0x2 level 50x100% ) ^
alpha off compose copy_opacity composite result.png
Please always provide your IM version and platform, since syntax differs.
Re: morphology operation that generate an additional compact border region around shapes
@ snibgo: the pictures were generated by conformal maps (a sub set of complex functions) for image distortion programmed in Matlab. IMs fx can not handle complex numbers so I had to look for an other environment. But now I have the problem that I can not duplicate the CopyOpacity+Over pipeline from IM/PerlMagick in Matlab with an adequate quality see discussion in http://stackoverflow.com/questions/4213 ... scalemask.
The problem is first the black areas in the RGB images; they must be masked out with a gray scale mask that is generated with the same conformal map therefore the position + shape corresponds. The second problem is that the black areas in both cases have aliased edges, therefore I want to optimize the mask (morphologically enlarge the black shapes + blur for soft transition) to eliminate the edge regions in the RGBs. See an image from https://www.flickr.com/photos/gbachelie ... 9863538505 for the aliased edge region in comparison to an image from https://www.flickr.com/photos/gbachelie ... 9935822485 that was made with a post processing PerlMagick script which serves a reference.
The problem is first the black areas in the RGB images; they must be masked out with a gray scale mask that is generated with the same conformal map therefore the position + shape corresponds. The second problem is that the black areas in both cases have aliased edges, therefore I want to optimize the mask (morphologically enlarge the black shapes + blur for soft transition) to eliminate the edge regions in the RGBs. See an image from https://www.flickr.com/photos/gbachelie ... 9863538505 for the aliased edge region in comparison to an image from https://www.flickr.com/photos/gbachelie ... 9935822485 that was made with a post processing PerlMagick script which serves a reference.
 fmw42
 Posts: 25549
 Joined: 20070702T17:14:5107:00
 Authentication code: 1152
 Location: Sunnyvale, California, USA
Re: morphology operation that generate an additional compact border region around shapes
If you are interested, I have a unix shell script that used IM fx to compute a half dozen different conformal maps. I had to do the complex math myself and then separate the real and imaginary parts. See my script, conformal, at my link below. Also above, I show one simple method to antialias the mask.
What complex functions are you using?
What complex functions are you using?
Re: morphology operation that generate an additional compact border region around shapes
@fmw42: I am in the experimental and development phase; I have used for the published images the bipole CM
a = 2; W = (1./(4*Z.^a  1));
extracted from https://karczmarczuk.users.greyc.fr/TEA ... pStill.jar
I will look at the script and your proposal with level soon. Thank you very much!
regards
Günter
a = 2; W = (1./(4*Z.^a  1));
extracted from https://karczmarczuk.users.greyc.fr/TEA ... pStill.jar
I will look at the script and your proposal with level soon. Thank you very much!
regards
Günter
Re: morphology operation that generate an additional compact border region around shapes
@fmw42: Have taken a look at the CM image examples: Very!!!! interesting because of
v vp ... VP is the virtualpixel method. Any virtualpixel method is allowed. The default=tile.
It seems that a virtualpixel method can avoid the empty black spaces that I am trying to fight with those post processing compose approaches above
(never thought of this even I know them in the context of Arc/Polar).
In ComplexMapStill.jar such black areas never were shown therefore I was unpleasantly surprised as this happens with Matlab.
This would solve all the problems but I suspect that I will have no luck to get something like "tile" in Matlab. Nevertheless I am very interested to read more about virtualpixel methods and get my hands on some source code (in the case I will have some resources for a freelancer.com C/C++2Matlab coder ) .
I will inform David Tschumperlé, the chief developer of http://gmic.eu/, about this who is very interested in porting some CM functionality with the math interpreter of gmic (http://opensource.graphics/imageproces ... evaluator/; much faster approach than fx because of precompiling)
v vp ... VP is the virtualpixel method. Any virtualpixel method is allowed. The default=tile.
It seems that a virtualpixel method can avoid the empty black spaces that I am trying to fight with those post processing compose approaches above
(never thought of this even I know them in the context of Arc/Polar).
In ComplexMapStill.jar such black areas never were shown therefore I was unpleasantly surprised as this happens with Matlab.
This would solve all the problems but I suspect that I will have no luck to get something like "tile" in Matlab. Nevertheless I am very interested to read more about virtualpixel methods and get my hands on some source code (in the case I will have some resources for a freelancer.com C/C++2Matlab coder ) .
I will inform David Tschumperlé, the chief developer of http://gmic.eu/, about this who is very interested in porting some CM functionality with the math interpreter of gmic (http://opensource.graphics/imageproces ... evaluator/; much faster approach than fx because of precompiling)

 Posts: 12150
 Joined: 20100123T23:01:3307:00
 Authentication code: 1151
 Location: England, UK
Re: morphology operation that generate an additional compact border region around shapes
In my view, IM's "fx" feature is useful for prototyping, and for processing of small "images" that are really data for cluts or whatever, eg 1000x1 pixels. But it is far too slow for manipulation of "real" images.
Without building (part of) a C compiler into IM, I don't know how it might be made faster.
Building and installing a program that calls IM to do processing takes around 0.5 seconds. So, for people with compilers, a simple script could be built that took an arbitrary expression and plugged that into the source code of a C program, then built and ran it.
And that script could be written as a process module, so we could call it from convert or magick:
Without building (part of) a C compiler into IM, I don't know how it might be made faster.
Building and installing a program that calls IM to do processing takes around 0.5 seconds. So, for people with compilers, a simple script could be built that took an arbitrary expression and plugged that into the source code of a C program, then built and ran it.
And that script could be written as a process module, so we could call it from convert or magick:
Code: Select all
magick in.png process 'conform "W = (1./(4*Z.^2  1))"' out.png
snibgo's IM pages: im.snibgo.com
 fmw42
 Posts: 25549
 Joined: 20070702T17:14:5107:00
 Authentication code: 1152
 Location: Sunnyvale, California, USA
Re: morphology operation that generate an additional compact border region around shapes
Yes, I agree with snibgo. The script could be converted to a Magick Filter. But I was holding off until Magick Filters are better integrated with IM.

 Posts: 12150
 Joined: 20100123T23:01:3307:00
 Authentication code: 1151
 Location: England, UK
Re: morphology operation that generate an additional compact border region around shapes
It could even be implemented as a builtin IM command:
... but then a C compiler would be a prerequisite for IM, which might be a step too far.
Code: Select all
magick in.png conform "W = (1./(4*Z.^2  1))" out.png
snibgo's IM pages: im.snibgo.com
 fmw42
 Posts: 25549
 Joined: 20070702T17:14:5107:00
 Authentication code: 1152
 Location: Sunnyvale, California, USA
Re: morphology operation that generate an additional compact border region around shapes
Any given complex expression could be built into an IM function. You would have to choose from some numbered option for the given expression. The IM function would have to have a switch option for each possible function that it contains. Providing an arbitrary expression is much harder and why IM fx is so slow (without a compiler).
 fmw42
 Posts: 25549
 Joined: 20070702T17:14:5107:00
 Authentication code: 1152
 Location: Sunnyvale, California, USA
Re: morphology operation that generate an additional compact border region around shapes
@gubach
I have added your expression 1/(4*z^21) to my conformal script. Let me know if it does not look correct.
It would be nice to see one of your input images.
I have added your expression 1/(4*z^21) to my conformal script. Let me know if it does not look correct.
It would be nice to see one of your input images.
Re: morphology operation that generate an additional compact border region around shapes
About the management of complex functions: In Matlab each complex function has its own mfile like conformalInverse_0001.h:
function U = conformalInverse(X, ~)
%#codegen
U = [zeros(size(X))];
Z = complex(X(:,1),X(:,2));
% insert CM formula here
a = 2; W = (1./(4 * Z.^a  1)); % bipole 1/(4*z^21)
U(:,2) = imag(W);
U(:,1) = real(W);
The mfilename is then referred in a main program in maketform that is used in imtransform so a RGB image C is distorted into T with:
conformal = maketform('custom', 2, 2, [], @conformalInverse_0001, []);
T = imtransform(C, conformal, 'bicubic', 'UData', uData,'VData', vData, 'XData', xData,'YData', yData, 'Size', [cm_out_h cm_out_w], 'FillValues', FillValue );
with some parameters:
uData = [ 1.25 1.25]; % Bounds for REAL(w)
vData = [ 0.75 0.75]; % Bounds for IMAG(w)
xData = [ 2.4 2.4 ]; % Bounds for REAL(z)
yData = [ 2.0 2.0 ]; % Bounds for IMAG(z)
cm_out_h = 3000; % h of output image
cm_out_w = 3000; % w of output image
FillValue = 0; % color definition for the filling of empty areas; 0 == black
'FillValues', FillValue would be the startingpoint for the virtualpixel methods like tile.
Perhaps a folder with compiled functions for IM that are called by file name would be a flexible and fast way.
@fmw42 : > I have added your expression 1/(4*z^21) to my conformal script.
I have prepared (but not yet tested) all the expressions found in https://karczmarczuk.users.greyc.fr/TEA ... pStill.jar for usage in a Matlab context (see below). To decide what might be worthy I found a quick check with ComplexMapStill.jar a good method and it can be used for arbitrary! expressions.
% a = 2; W = (1./(Z.^a)); % 1/(z^a)
% a = 2; W = (1./(4*Z.^a  1)); % bipole 1/(4*z^21)
% W = 5 .* ((Z.^3)./3  Z./4)./2; %5*(z^3/3z/4)/2
% W = (2.*Z^4) + (4.*(11i).*(Z.^3)./3)  ((1+1i).*Z.^2)  Z; %2*z^4+4*(1i)*z^3/3(1+i)*z^2z
% W = ((Z0.5)./(Z+0.5)).^2; %((z0.5)/(z+0.5))^2
% W = log(Z).*240./(pi.*320); %log(z)*240/(Pi*320)
%W = (log(Z).*(240./320+3.*1i))./(2.*pi); %log(z)*(240/320+3*i)/(2*Pi) imagenery unit 1i = i
%W = (log(Z1./2)+log(Z+1./2)+log(Z1i/2)+log(Z+1i./2)+log(Z))*(240./3203.*1i)./(2.*pi); %(log(z1/2)+log(z+1/2)+log(zi/2)+log(z+i/2)+log(z))*(240/3203*i)/(2*Pi)
%W = 1 + Z + (Z.^2)./2; % Taylor exp: 1+z+z^2/2
%W = ((Z1)(Z1).^2/2+(Z1).^3./3+(Z1).^4./4(Z1).^5/.5+(Z1).^6./6(Z1).^7./7).*240./(pi.*320); %Taylor log: ((z1)(z1)^2/2+(z1)^3/3+(z1)^4/4(z1)^5/5+(z1)^6/6(z1)^7/7)*240/(Pi*320)
%W = ((1+Z./6)/(1Z./6)).^3; % Prod exp: ((1+z/6)/(1z/6))^3
%W = cos(Z.*pi);
%W = sin(Z.*pi);
%W = (sin(Z.*pi))./(cos(Z.*pi)); %tan: (sin(z*Pi))/(cos(z*Pi))
%W = 1(Z.*pi).^2./2+(Z.*pi).^4./24+(Z.*pi).^6./720(Z.*pi).^8./40320; %Taylor cos: 1(z*Pi)^2/2+(z*Pi)^4/24+(z*Pi)^6/720(z*Pi)^8/40320
%W = (Z.*pi)(Z.*pi).^3./6+(Z.*pi).^5./120(Z.*pi).^7./5040; % Taylor sin: (z*Pi)(z*Pi)^3/6+(z*Pi)^5/120(z*Pi)^7/5040
%W = Z.*pi+(Z.*pi).^3./3+2.*(Z.*pi).^5./15+17.*(Z.*pi).^7./315; %Taylor tan: z*Pi+(z*Pi)^3/3+2*(z*Pi)^5/15+17*(z*Pi)^7/315
function U = conformalInverse(X, ~)
%#codegen
U = [zeros(size(X))];
Z = complex(X(:,1),X(:,2));
% insert CM formula here
a = 2; W = (1./(4 * Z.^a  1)); % bipole 1/(4*z^21)
U(:,2) = imag(W);
U(:,1) = real(W);
The mfilename is then referred in a main program in maketform that is used in imtransform so a RGB image C is distorted into T with:
conformal = maketform('custom', 2, 2, [], @conformalInverse_0001, []);
T = imtransform(C, conformal, 'bicubic', 'UData', uData,'VData', vData, 'XData', xData,'YData', yData, 'Size', [cm_out_h cm_out_w], 'FillValues', FillValue );
with some parameters:
uData = [ 1.25 1.25]; % Bounds for REAL(w)
vData = [ 0.75 0.75]; % Bounds for IMAG(w)
xData = [ 2.4 2.4 ]; % Bounds for REAL(z)
yData = [ 2.0 2.0 ]; % Bounds for IMAG(z)
cm_out_h = 3000; % h of output image
cm_out_w = 3000; % w of output image
FillValue = 0; % color definition for the filling of empty areas; 0 == black
'FillValues', FillValue would be the startingpoint for the virtualpixel methods like tile.
Perhaps a folder with compiled functions for IM that are called by file name would be a flexible and fast way.
@fmw42 : > I have added your expression 1/(4*z^21) to my conformal script.
I have prepared (but not yet tested) all the expressions found in https://karczmarczuk.users.greyc.fr/TEA ... pStill.jar for usage in a Matlab context (see below). To decide what might be worthy I found a quick check with ComplexMapStill.jar a good method and it can be used for arbitrary! expressions.
% a = 2; W = (1./(Z.^a)); % 1/(z^a)
% a = 2; W = (1./(4*Z.^a  1)); % bipole 1/(4*z^21)
% W = 5 .* ((Z.^3)./3  Z./4)./2; %5*(z^3/3z/4)/2
% W = (2.*Z^4) + (4.*(11i).*(Z.^3)./3)  ((1+1i).*Z.^2)  Z; %2*z^4+4*(1i)*z^3/3(1+i)*z^2z
% W = ((Z0.5)./(Z+0.5)).^2; %((z0.5)/(z+0.5))^2
% W = log(Z).*240./(pi.*320); %log(z)*240/(Pi*320)
%W = (log(Z).*(240./320+3.*1i))./(2.*pi); %log(z)*(240/320+3*i)/(2*Pi) imagenery unit 1i = i
%W = (log(Z1./2)+log(Z+1./2)+log(Z1i/2)+log(Z+1i./2)+log(Z))*(240./3203.*1i)./(2.*pi); %(log(z1/2)+log(z+1/2)+log(zi/2)+log(z+i/2)+log(z))*(240/3203*i)/(2*Pi)
%W = 1 + Z + (Z.^2)./2; % Taylor exp: 1+z+z^2/2
%W = ((Z1)(Z1).^2/2+(Z1).^3./3+(Z1).^4./4(Z1).^5/.5+(Z1).^6./6(Z1).^7./7).*240./(pi.*320); %Taylor log: ((z1)(z1)^2/2+(z1)^3/3+(z1)^4/4(z1)^5/5+(z1)^6/6(z1)^7/7)*240/(Pi*320)
%W = ((1+Z./6)/(1Z./6)).^3; % Prod exp: ((1+z/6)/(1z/6))^3
%W = cos(Z.*pi);
%W = sin(Z.*pi);
%W = (sin(Z.*pi))./(cos(Z.*pi)); %tan: (sin(z*Pi))/(cos(z*Pi))
%W = 1(Z.*pi).^2./2+(Z.*pi).^4./24+(Z.*pi).^6./720(Z.*pi).^8./40320; %Taylor cos: 1(z*Pi)^2/2+(z*Pi)^4/24+(z*Pi)^6/720(z*Pi)^8/40320
%W = (Z.*pi)(Z.*pi).^3./6+(Z.*pi).^5./120(Z.*pi).^7./5040; % Taylor sin: (z*Pi)(z*Pi)^3/6+(z*Pi)^5/120(z*Pi)^7/5040
%W = Z.*pi+(Z.*pi).^3./3+2.*(Z.*pi).^5./15+17.*(Z.*pi).^7./315; %Taylor tan: z*Pi+(z*Pi)^3/3+2*(z*Pi)^5/15+17*(z*Pi)^7/315
 fmw42
 Posts: 25549
 Joined: 20070702T17:14:5107:00
 Authentication code: 1152
 Location: Sunnyvale, California, USA
Re: morphology operation that generate an additional compact border region around shapes
Too much effort for me to manually separate the real and imaginary components of all your expressions or even the more complicated ones. Sorry.
Re: morphology operation that generate an additional compact border region around shapes
@fmw42: > Too much effort for me to manually separate the real and imaginary components of all your expressions or even the more complicated ones.
I had a look at your script and the transformation of a textbook expression to your syntax is indeed difficult.
I have made a first experiment to compare the script and Matlab.
I got some messages but it produced results
conformal.sh: Zeile 116: type: conformal.sh: Nicht gefunden.
dirname: fehlender Operand
„dirname help“ gibt weitere Informationen.
basename: fehlender Operand
„basename help“ gibt weitere Informationen
All images are 3000x3000:
input: https://www.flickr.com/photos/gbachelie ... edpublic/
script: https://www.flickr.com/photos/gbachelie ... edpublic/
Matlab: https://www.flickr.com/photos/gbachelie ... edpublic/
One can see that the script computes a more zoomed in part of the Matlab result. Perhaps you can give me a proposal for alternative values for "g 1,1" to zoom out that both images are better comparable.
Processing time: I had stopped looking at 5 min (>300 sec) whereas Matlab took about 7 sec. I will try to plug it in my standard batch processing PerlMagick template (with a systemcall) to get a time statistic, but it is clear that IMfx cannot be used this way in my art process with image populations of 1000 individuals.
I had a look at your script and the transformation of a textbook expression to your syntax is indeed difficult.
I have made a first experiment to compare the script and Matlab.
I got some messages but it produced results
conformal.sh: Zeile 116: type: conformal.sh: Nicht gefunden.
dirname: fehlender Operand
„dirname help“ gibt weitere Informationen.
basename: fehlender Operand
„basename help“ gibt weitere Informationen
All images are 3000x3000:
input: https://www.flickr.com/photos/gbachelie ... edpublic/
script: https://www.flickr.com/photos/gbachelie ... edpublic/
Matlab: https://www.flickr.com/photos/gbachelie ... edpublic/
One can see that the script computes a more zoomed in part of the Matlab result. Perhaps you can give me a proposal for alternative values for "g 1,1" to zoom out that both images are better comparable.
Processing time: I had stopped looking at 5 min (>300 sec) whereas Matlab took about 7 sec. I will try to plug it in my standard batch processing PerlMagick template (with a systemcall) to get a time statistic, but it is clear that IMfx cannot be used this way in my art process with image populations of 1000 individuals.